MEASTEK MDP4150C High Voltage Differential Probe 200MHz bandwidth, 500X attenuation ratio, overload protection and low noise
1. Ultra-high voltage measurement capability
Supports ±1500V peak differential voltage and ±1500V common mode voltage , meeting the test requirements of high-voltage devices such as IGBT and MOSFET.
600V CATII/1000V CATI safety level, built-in overload protection (＞1500Vpk triggers red light alarm) to ensure safe operation.
2. High precision and high bandwidth
200MHz bandwidth + 3.5ns rise time, suitable for high-frequency scenarios such as switching power supplies and inverters.
1% accuracy + 500X attenuation ratio to achieve accurate restoration of tiny signals.
3. Low load effect design
10MΩ differential impedance + ＜2pF input capacitance, minimizes the impact on the circuit under test, suitable for high impedance node measurement.
4. Anti-interference and stability
High common mode rejection ratio (DC 80dB), effectively suppresses noise and improves signal integrity.
Delay time compensation: 9ns on the host side/5ns on 1m cable, supports multi-channel synchronous testing.
5. Convenient functions
USB 5V power supply, no additional power supply required, compatible with oscilloscopes and other devices.
Specifications
| Model |
MDP4150C
|
| Bandwidth (-3dB) |
200 MHz
|
| Rise time (ns) |
≤1.75
|
| Accuracy |
1%
|
| Attenuation ratio |
500X
|
| Maximum differential measurement voltage (DC+Peak AC) |
±1500Vpk
|
| RMS |
±1060Vrms
|
| Maximum input voltage to ground (Vrms) |
600V CATII
1000V CATI
|
| Common mode voltage(DC+Peak AC) |
±1500Vpk
|
| Input Impedance |
Single-ended to ground 5MΩ |
| Two input terminals 10MΩ |
| Input Capacitance |
Single-ended to ground <4pF |
| Two input ends <2pF |
|
CMRR
|
DC ＞80dB |
| 100kHz＞60dB |
| 1MHz＞50dB |
| Noise (Vrms) |
＜300mV |
| Delay time |
Host: about 9ns |
| BNC cable 1m: about 5ns |
| Overload indicator voltage threshold |
＞1500Vpk |
| Overload indicator light (red light) |
Yes |
| Auto-save function |
Yes |
| Terminal load requirement |
≥100kΩ |
| power supply |
USB 5V/1A adapter |
Applications
| Floating voltage measurement |
Power battery failure analysis |
| Inverter |
Switching power supply design |
| Welding, electroplating power supply |
Induction heating, induction cooker |
| Motor drive design |
Electronic ballast design |
| Electrical experiment |
Inverter, UPS power supply |
| Frequency conversion appliances |
Power conversion and other related designs |
| Low voltage electrical appliance test |
Power electronics and power transmission experiment, etc. |
| igh and medium voltage inverters (inverters) |
Efficiency evaluation of wireless power transmission systems (WPT) |
Packing List
| Name |
Quantity |
| High-voltage differential probe |
1 piece |
| Test hook |
1 pair |
| Input extension cable |
1 pair |
| BNC output cable |
1 piece |
| Power output cable |
1 piece |
| Power adapter |
1 piece |
| Test report |
1 piece |
| Warranty card |
1 piece |
| Probe box |
1 piece |
Product Tags:
|
|
MEASTEK MDP4150C High Voltage Differential Probe 200MHz Bandwidth, 500X Attenuation Ratio, Overload Protection And Low Noise Images
|
